6dof.com CAE web portal

Welcome to 6dof.com, Simulation and Finite Elements web Portal !
MSC.Software Selected by Alenia Aeronautica as Vendor of Choice for Enterprise Digital Product Development Initiative PDF Print E-mail
  
Thursday, 14 August 2008 14:47
Global Aeronautics Leader to Simulate More Using Enterprise Simulation Solutions


SANTA ANA, Calif, August 5, 2008 - MSC.Software (NASDAQ: MSCS), the leading global provider of enterprise simulation solutions, including simulation software and services, today announced that it has been selected by Alenia Aeronautica, one of the world's leading companies in commercial and defense aeronautics as the vendor of choice and Prime Partner for the company's Alenia Networked Enterprise Transformation (ALENET) initiative in order to sustain and accelerate planned Company growth for the next decade. ALENET Project is a multi-year business transformation initiative, designed to deliver benefits in standardization, streamlining, and innovation to Alenia companies, suppliers, partners, and customers worldwide.

Read more...
 
Meshing: The Critical Bridge PDF Print E-mail
  
Thursday, 14 August 2008 14:24

The drive for excellence in this sometimes-hidden step between modeling and analysis.

| Published August 1, 2008


This engine-compartment closeup of an AGCO tractor shows that all of the detail of the original CADmodel is retained for a PowerFLOW simulation of airflow management and cooling. It was not necessary to defeature for the simulation and the volume mesh was automatically generated. Image courtesy of Exa and AGCO.

If you remember anything from Finite Elements 101, it’s that successful design analysis includes creating a meaningful mesh. At a detailed level, analysts love to discuss the merits of shells versus solids and tet versus hex types. At the broader level, there are diverging approaches to the fundamental physics, and the needs of structural analysts differ from those analyzing fluid flow (meshing a surface/solid or the volume around it).

Defining the Problem
At COMSOL, Bernt Nilsson, senior VP of marketing, summarizes activity in the preprocessing arena. “The main challenge for the meshing community over the past years has been to develop tools that prepare the CAD model for efficient meshing. This includes both de-featuring operations that modify the underlying CAD model, often referred to as real operations, and tools for modifying an overlay topology on the original model, referred to as virtual operations.

Read full article at deskeng.com 

 
NAFEMS webinar on Complexity in the Industry PDF Print E-mail
  
Thursday, 14 August 2008 13:57
NAFEMS will host a webinar on complexity, 14-th August, 2008. The webinar, "Complexity in the Industry" shall be held by Dr. J. Marczyk, the CTO and founder of Ontonix. The webinar times are the following:

August 14, 2008 11:00 am, Eastern Daylight Time (GMT -04:00, New York)           
August 14, 2008 8:00 am, Pacific Daylight Time (GMT -07:00, San Francisco)
August 14, 2008 4:00 pm, GMT Daylight Time (GMT +01:00, London)
August 14, 2008 5:00 pm, Europe Daylight Time (GMT +02:00, Paris)
 
Siemens PLM Software Ships Version 6 of NX PDF Print E-mail
  
Tuesday, 29 July 2008 17:39

New Release Provides the Power of Synchronous Technology and New Advanced Simulation Functionality

PLANO, Texas, July 29, 2008 – Siemens PLM Software, a division of Siemens Industry Automation Division and a leading global provider of product lifecycle management (PLM) software and services, today announced Version 6 of NX™ software is now available to Siemens customers worldwide.

Read more...
 
Now Available: FiberSIM® 5.4 PDF Print E-mail
  
Thursday, 31 July 2008 17:24

VISTAGY’s New FiberSIM® 5.4 Software Delivers Optimized Composites Designs in Less Time

New FiberSIM® 5.4 software delivers optimized composites designs in a shorter period of time by enabling engineers to perform more design iterations later in the development process—which is essential to effectively evaluate tradeoffs between part performance, weight and manufacturing cost. The software improves the link between analysis and design and provides new tools to enable engineers to design for the specific manufacturing process. These key features make FiberSIM 5.4 the best-in-class tool for exploiting innovative uses of composite materials in products that never before made use of them.

Read more...
 
ALGOR V22 Upgrades All Areas of FEA: Modeling, Simulation and Results PDF Print E-mail
  
Friday, 25 July 2008 16:51

 

ALGOR V22 software significantly upgrades all areas of FEA: modeling, simulation and results evaluation and presentation, providing users with increased power, flexibility and ease-of-use for simulating engineering analyses of their product designs. As shown here, new and improved features include: expanded support for 64-bit systems; open channel flow; a multifrontal massively parallel solver (MUMPS); damage analysis; remote loads; improved beam modeling; meshing improvements; mesh studies; enhanced tools for pressure vessel design; and the capability to display flow rate results.

PITTSBURGH, PA – July 23, 2008 – ALGOR, Inc., a leading provider of design, analysis and simulation software, announced that its latest, major finite element analysis (FEA) software release, ALGOR V22, significantly upgrades all areas of FEA – modeling, simulation and results evaluation and presentation.

New and improved features include: expanded support for 64-bit systems, now including pre-processing and post-processing, allows users to handle larger models faster than ever before; analysis of open channel flow, involving a free surface between a flowing fluid and a gas above it, such as marine systems, drainage systems and liquid column gauges; a multifrontal massively parallel solver (MUMPS) for distributed memory systems, which allows faster solution of linear and nonlinear stress and fluid flow models; damage analysis for 2-D plane stress elements, primarily intended for simulating damage onset and growth in fiber-reinforced composite materials; and a software wizard to automatically calculate and apply remote loads to a stress model, such as a torque load to simulate twisting.

Read more...
 
The MathWorks Real-Time Workshop Embedded Coder Certified By TÜV SÜD Automotive GMBH PDF Print E-mail
  
Thursday, 14 August 2008 14:10

Certification Enables Engineering Teams to Develop Safety Related Software According to IEC 61508-3:1998

NATICK, Mass. - (12 Aug, 2008)

The MathWorks today announced that its Real-Time Workshop Embedded Coder  product for MathWorks Release 2008a was certified by TÜV SÜD Automotive GmbH.

According to the certificate report from TÜV, “The MathWorks development organization responsible for developing the Real-Time Workshop Embedded Coder has been audited to assess its development and quality assurance procedures. This assessment focused on the software modification process, customer bug reporting, and fitness for purpose for safety-related development according to IEC 61508.”

Read more...
 
EADS Selects PTC PDF Print E-mail
  
Thursday, 31 July 2008 17:45

EADS Selects PTC To Become The Single Provider For Its “PHENIX” Enterprise Product Lifecycle Management Solution

Harmonized PLM Environment to Improve Enterprise Integration, Reduce Time to Market and Increase Overall Product Quality

 

Needham, MA – July 29, 2008 – PTC (Nasdaq: PMTC), The Product Development Company®, announced today that it is has been selected by EADS to harmonize enterprise PLM solutions across all EADS business divisions as part of EADS’s PHENIX initiative. PHENIX is an EADS cross-divisional program and a group-wide strategic initiative launched in 2007 to achieve harmonization of enterprise PLM methods, processes and tools between business units.

Read more...
 
2008 International ANSYS Conference to Inspire Engineering PDF Print E-mail
  
Monday, 28 July 2008 17:32

Engineering Simulation Solutions Leader Brings Together Product Innovators this August

SOUTHPOINTE, Pa.--(BUSINESS WIRE)--July 28, 2008--ANSYS, Inc. (NASDAQ: ANSS), a global innovator of simulation software and technologies designed to optimize product development processes, today announced its hallmark event, the 2008 International ANSYS Conference. A must-attend event for executives, managers and technical staff in a wide range of industries, the conference is scheduled for August 26 to 28 at the David L. Lawrence Convention Center in Pittsburgh, Pennsylvania, U.S.A.

This is the 14th conference that ANSYS has staged since its inaugural event in 1983. During the last two decades, as simulation has become a critical element of the product development process, the content, breadth of technology and attendance of the International ANSYS Conference has grown as well. Companies from around the world, in a wide range of industries, are planning to attend the 2008 event. More than 800 people attended the last conference, held in 2006. ANSYS also will be hosting an analyst day in conjunction with the conference on August 26 for financial and industry analysts.

Read more...
 
ESI Group Announces PAM-ASSEMBLY 2008 PDF Print E-mail
  
Friday, 25 July 2008 16:57

New Release Features Major Enhancements in Efficiency and User Interface

Paris, France –  July 24, 2008 – ESI Group (ESIN FR0004110310), a pioneer and world-leading supplier of digital simulation software for prototyping and manufacturing processes, announced today the release of PAM-ASSEMBLY 2008, the ideal simulation software tool for improving welding and welding assembly processes.  PAM-ASSEMBLY helps design engineers and manufacturers significantly reduce the required amount of prototyping and distortion repair work, thus improving the quality of welded products. A key benefit of PAM-ASSEMBLY is the user’s ability to quickly identify both the direction and magnitude of welding distortion, which allows implementation of both specific measures to keep welding distortion within prescribed tolerances, and development of a suitable weld plan.

 Welding Distortion Engineering, courtesy YTEC Welding Distortion Engineering, courtesy YTEC


Read more...
 
ESI Group Releases Virtual Performance Solution 2008 PDF Print E-mail
  
Tuesday, 22 July 2008 22:20

Scalable Simulation Solution Spans Multiple Applications and Domains Using One Simulation Model

Paris, France – July 22, 2008 – ESI Group (ESIN FR0004110310), a pioneer and world-leading supplier of digital simulation software for prototyping and manufacturing processes, announced today the release of Virtual Performance Solution 2008, a highly versatile software application package addressing the market’s need for scalable simulation solutions and Multi-Domain Optimization.

Comprising implicit and explicit solvers, user environment software, and compute models, ESI Group’s Virtual Performance Solution represents a major release: it combines several applications, technologies, and cutting-edge options to effectively address industry challenges of accelerating time-to-market, reducing product development costs, and meeting quality targets.

Video interview of ESI Group Chairman & CEO Alain de Rouvray

 

Read more...
 
<< Start < Prev 1 2 3 4 5 6 7 8 Next > End >>

Page 6 of 8

Login Form



6dof newsletter



Receive HTML?
Note: 6dof members are registered by default

Polls

What is your favorite FEA pre&post processor?
 

Who's Online

We have 31 guests online

Advertisement



Ontonix website
Copyright © 2017 6dof.com CAE web portal. All Rights Reserved.
Joomla! is Free Software released under the GNU/GPL License.