6dof.com CAE web portal

Welcome to 6dof.com, Simulation and Finite Elements web Portal !
MSC Software's Acquisition of the MacNeal Group changes the Simulation Landscape PDF Print E-mail
  
Thursday, 03 July 2008 09:23

Acquisition Reunites Company with Nastran Founder, Dr. Richard MacNeal and Extends Multi-Discipline Simulation with Enterprise Enabled Part and Assembly Modeling


SANTA ANA, Calif. - June 24, 2008 - MSC.Software (NASDAQ: MSCS), the leading global provider of enterprise simulation solutions, including Nastran software and services, today announced that it has acquired the MacNeal Group (tMG). The MacNeal Group was founded by Dr. Richard MacNeal, a pioneer for the CAE market and the leading authority on finite element technology. This acquisition maximizes the natural synergies between both companies around Nastran technology and provides superior simulation technology for the on-going globalization of the engineering supply chain.

Read more...
 
Dassault Systèmes to Acquire Engineous Software PDF Print E-mail
  
Thursday, 03 July 2008 09:19

Expands PLM 2.0 for Simulation Lifecycle Management

Paris, France, and Providence, R.I., USA, June 17, 2008 – Dassault Systèmes (DS) (Nasdaq: DASTY; Euronext Paris: #13065, DSY.PA), a world leader in 3D and Product Lifecycle Management (PLM) solutions and Engineous Software, a market leader in process automation, integration and optimization, today announced an agreement in which DS would acquire Engineous Software. This acquisition will extend SIMULIA’s leadership in providing Simulation Lifecycle Management solutions on the V6 IP collaboration platform. The proposed acquisition, for an estimated price of 40 million USD, should be completed before the end of July subject to specific closing conditions. The transaction is expected to be non dilutive on DS non-GAAP 2008 earnings.

Read more...
 
ALGOR DesignCheck Provides Fully Integrated Simulation for PTC� Pro/ENGINEER� Users PDF Print E-mail
  
Thursday, 05 June 2008 14:10

The technology partnership between Parametric Technology Corporation and ALGOR, Inc. provides a complete, integrated process for design and analysis using Pro/ENGINEER and ALGOR. At the top, a motorcycle piston was modeled in Pro/ENGINEER (upper left) and analyzed in ALGOR DesignCheck (upper right) to determine the distribution of stresses under linear static conditions. On the bottom, a Pro/ENGINEER model of a gasket and housing (lower left) was analyzed using ALGOR (lower right) to study the overall closure of the gasket seal.

Read more...
 
SimManager R3 Delivers Breakthrough Productivity with Workgroup to Enterprise Scalability PDF Print E-mail
  
Thursday, 05 June 2008 14:03

SimManager R3 Delivers Breakthrough Productivity with Workgroup to Enterprise Scalability


Simulation Content and Process Management Solution Empowers Engineers to Simulate More Productively and Drive Innovation


SANTA ANA, Calif. - June 2, 2008 - MSC.Software (NASDAQ: MSCS), the leading global provider of enterprise simulation solutions, including simulation software and services, today announced the release of SimManager R3, the world's only proven and scalable simulation content and process management solution.  R3 delivers major improvements to performance and scalability of the system, empowering companies to simulate more productively by enabling more consistent and reliable simulation for teams from departmental to extended enterprise.

Read more...
 
26 May 2008 - Materialise praises the most outstanding RP&M software applications PDF Print E-mail
  
Thursday, 05 June 2008 13:22

Leuven (Belgium), May 26th, 2008. In 2008, Materialise NV is looking back at 15 years of software development for the Rapid Prototyping and Manufacturing (RP&M) industry.

One of the ways in which Materialise celebrates the 15th anniversary of its Magics software, is to pay tribute to the most outstanding applications of its RP&M software, not only Magics, but also 3-matic. For this reason, Materialise is offering the inaugural edition of the Materialise Pyramid Awards in 2008.

Read more...
 
ANSYS Ranked 5th on CIOZone List of 40 Fastest-Growing Big Software Companies PDF Print E-mail
  
Saturday, 17 May 2008 16:13

SOUTHPOINTE, Pa., April 28 /PRNewswire-FirstCall/ -- ANSYS, Inc. (Nasdaq: ANSS), a global innovator of simulation software and technologies designed to optimize product development processes, today announced that it has been ranked fifth on the CIOZone(TM) list of 40 Fastest-Growing Big Software Vendors. Part of its Surging 60 compilation, the listing provides ready information for chief information officers to use in making IT business decisions. ANSYS was one of only two engineering simulation software companies that made the list of 40 Fastest-Growing Big Software Vendors.

Read more...
 
Materialise releases version 12 of their image processing software Mimics. PDF Print E-mail
  
Monday, 30 June 2008 13:01

Materialise releases version 12 of their image processing software Mimics. Together with this release they present their new house style. Mimics 12 contains a brand new module for pore analysis, segmentation enhancements and much more.

Leuven, June 17, 2008. Materialise releases already version 12 of their image processing software Mimics. With it they also present their brand new house style. It proves Materialise is at the leading edge of image processing and will continue to provide high-end solutions for image-based applications like FEA, CFD, RP, implant design and many more.

Read more...
 
New Engineering Simulation Software Performs Virtual PDF Print E-mail
  
Thursday, 05 June 2008 14:05

WESTMINSTER, CA--(June 2, 2008) - Noran Engineering, Inc. (NEi), a global leader in the development of NEi Nastran™ engineering software announced that it will demonstrate new analysis and simulation software at the Atlantic Design and Manufacturing Show, June 3-5, 2008 at the Jacob Javits Center in New York City. NEi is at Booth # 338. Digital prototyping technology developed by NEi enables product engineers to visualize the response of their designs to structural and thermal loads before investing in physical prototypes and test programs. This means changes and optimization can occur early in the development process saving time, money and improving the ability to meet regulatory requirements like FDA approval.

 

Last Updated ( Thursday, 05 June 2008 14:38 )
Read more...
 
Dassault Systèmes Introduces V6 to the Market PDF Print E-mail
  
Thursday, 05 June 2008 13:43

Sixth Generation Solution Brings PLM 2.0 to Life

Suresnes, France, May 29, 2008 – Dassault Systèmes (DS) (Nasdaq: DASTY; Euronext Paris: #13065, DSY.PA), a world leader in 3D and Product Lifecycle Management (PLM) solutions, today announced the market introduction of V6, a next generation PLM 2.0 platform and solution set. Unveiled in January, this sixth generation version was conceived in tight collaboration with industry leaders and leverages the success of DS brands and V5 PLM. V6 harnesses the power of Web 2.0, Web 3D and Dassault Systèmes’ rich technology portfolio.

Last Updated ( Thursday, 05 June 2008 13:54 )
Read more...
 
MSC Software Announces the 2008 Releases of its Engineering Analysis and Next Generation MD Technologies PDF Print E-mail
  
Thursday, 05 June 2008 13:13

Enables Businesses to Achieve Greater ROI through Enterprise Engineering Simulation Reliability and Accuracy


SANTA ANA, Calif., May 19, 2008 - MSC.Software (NASDAQ: MSCS), the leading global provider of enterprise simulation solutions, including simulation software and services, today announced the 2008 release of its complete engineering analysis suite as well as its MD Technologies - a core component of MSC SimEnterprise that includes MD Nastran and MD Adams. The concurrent release highlights the seamless path forward that leverages existing MSC.Software single analysis point tools to MD's multiple discipline analysis. MD complements MSC.Software's engineering foundation technology with enhanced solver integration that enables greater simulation accuracy and improved system level analysis, to reduce the gap between systems simulation and physical testing.

Read more...
 
Moldflow Announces The Release Of Moldflow Communicator 2.0 PDF Print E-mail
  
Saturday, 17 May 2008 16:10

FRAMINGHAM, MA - April 24, 2008 - Moldflow Corporation (NASDAQ:MFLO), the leading provider of plastics simulation software that empowers more users to optimize more designs across their enterprise, today announced the release of Moldflow Communicator™ 2.0, a free simulation results viewer that allows distributed product teams to visualize, quantify and compare Moldflow analysis results.  New features allow the Communicator to be accessed by a wider audience and updates to the user interface and new operating system support should result in increasing its position as the leading plastics simulation results viewer.

Read more...
 
<< Start < Prev 1 2 3 4 5 6 7 8 Next > End >>

Page 8 of 8

Login Form



6dof newsletter



Receive HTML?
Note: 6dof members are registered by default

Polls

What is your favorite FEA pre&post processor?
 

Who's Online

We have 77 guests online

Advertisement



Ontonix website
Copyright © 2017 6dof.com CAE web portal. All Rights Reserved.
Joomla! is Free Software released under the GNU/GPL License.